TCB Metal Works
Free Shop Tool

Steel Weight Calculator

Pick a shape, enter its size and length, and get the weight per foot, the weight of each piece and the total. Covers plate, bar, tube and angle in steel, stainless or aluminum, plus every beam, channel, angle, tube and pipe size in the AISC shapes database.

Plate, Bar, Tube & Beams

Weigh it before you lift it.

Results update as you type. Inches take whole numbers, decimals or fractions, such as 3, 0.25 or 1 1/2.

Length
Leave blank for weight per foot only.
Quantity
WEIGHT PER FOOT—
WEIGHT EACH—
TOTAL WEIGHT—

Nominal weights. Mill tolerance, coatings and galvanizing make real stock a few percent different. Use a scale or the mill cert for anything that matters, such as a lift near the limit of your gear.

Where the Numbers Come From

Published weights where they exist.

Standard shapes

Beams, channels, angles, tube and pipe from the list use the weight per foot published in the AISC Shapes Database v16.0, which matches the AISC Steel Construction Manual, 16th Edition.

Your own size

Plate, bar, tube and angle you size yourself are worked from the cross-section area times the density of the metal. Square and rectangular tube use an outside corner radius of twice the wall, the same way AISC works out tube weights.

Stock is not exact

A delivered bar or plate can run heavier or lighter than nominal within its mill tolerance. Plate is often rolled a little over. Treat these as estimating weights, not scale weights.

How It Works

Area times length times density.

Weight per foot is the area of the cross-section in square inches, times 12 inches, times the density of the metal in pounds per cubic inch. The densities used:

MaterialDensity usedPer square inch of section
Carbon steel0.2836 lb per cubic inch (490 lb per cubic foot)3.40 lb per foot
Stainless steel0.289 lb per cubic inch3.47 lb per foot
Aluminum0.0975 lb per cubic inch1.17 lb per foot

Angles you size yourself are worked as two sharp-cornered legs, which leaves out the small fillet in the root. For standard angle sizes, pick “Angle (AISC sizes)” for the published weight. Hex bar uses its size across the flats.

Estimating aid. Weight is not strength. This tool does not size a member for a load. For rigging a piece, see our free rigging calculator, and never lift near the limit of your gear on an estimated weight.

Have a Project?

Talk to Our Team

Our specialists are happy to answer your questions and help scope your project.